Page 233 - RWSmith_2012_SingleFile

info@rwsmithco.com 1-800-942-1101 R.W. SMITH & CO.
Equipment
233
Ventilation
Special Orders
Allow 3 Weeks Universal
Ventless Hood
Stainless steel construction.
Airflow Sensing System
continually monitors airflow
through the filtration system.
Ansul® R-102 Fire Suppression
System. Removable/
replaceable multi stage filter
system. Use with electric
appliances only with a
maximum of 22kW output.
Adjustable legs for leveling.
208/240V.
Centrifugal Up-Blast Belt Drive Fan
A wide variety of motors are available to meet specific application needs. Heavy duty construction,
durable and weather resistant. Non-overloading backward inclined wheels, blades and inlets
fabricated from 3003-H14 aluminum. Wall mount applications available for units up to 24" wheel
size. Forced fresh air through the motor compartment cools motor and ensures long motor life.
Quick release latches allow for easy access to motor compartment. Variable pitch motor pulley
allows for field adjustment and system balancing. High efficiency combined with low tip speeds
result in quiet operation. External disconnect switch.
Up-Blast Centrifugal Utility Set
Ideal for high temperature, heavy grease applications. Curb mounted design for easier installation.
Ventilated motor housing for motor, shaft and drive protection. Adjustable motor plate assembly.
Tilt out wheel - easy access during maintenance, automatic safety lock with manual release.
Interlocked disconnect switch. Non-overloading, welded aluminum backward inclined wheel is
statically and dynamically balanced and permits usage on high static pressure applications.
Heavy duty bearings in excess of 200,000 hours of operation. Motor base and shaft seals provide a
double layer of protection to eliminate water leaks into the building and grease build-up on motor.
2" grease drain fully welded onto discharge elbow. Lock and retaining pin keep wheel centered
over the inlet.
Modular Packaged Unit
Designed to be a factory packaged air conditioning
and heating unit for 100% Outdoor Air applications.
Units are sized to operate between 360 to 600 cfm/
ton of cooling, depending on climate. Optimized to
work in conjunction with highly efficient make-up air
delivery methods, such as perimeter supply plenums.
The unit can either have a down or end discharge,
and can be used with both electric and gas heat.
All refrigerant is environmentally friendly R-410A and
condensers have a nominal SEER rating of 14 for
greater efficiency. Multiple cooling stages increase
the efficiency by not using 100% of the cooling
capacity when it is not needed.
Next Generation
Exhaust Hoods
All hoods can be used as stand-alone appliances to be integrated
into kitchen ventilation application or provided as part of a fully
integrated package designed and pre-engineered for optimum
performance.
#WVU-24
24" Cook Zone,
33"w x 421⁄2 "d x 80"h
#NCA
#CASRE
#MPU
Description For Use On Cooking Surfaces
#ND-2 Wall Canopy Hood Over 450˚F, 600˚F & 700˚F
#SND-2 Sloped Wall Canopy Hood Over 400˚F & 600˚F
#BD-2 Low Proximity Hood Over 450˚F & 600˚F
#ND-2
#SND-2
#BD-2